Rights Contact Login For More Details
More About This Title Particulate Emissions from Vehicles
English
Particulate Emissions from Vehicles addresses a field of increased international interest and research activity; discusses the impact of new legislation globally on the automotive industry; and explains new ways of measuring particle size, number and composition that are currently under development. The expert analysis and summary of the state-of-the-art, which encompasses the key areas of combustion performance, measurement techniques and toxicology, will appeal to R&D practitioners and engineers working in the automotive industry and related mechanical fields, as well as postgraduate students and researchers of engine technology, air pollution and life/ environmental science. The public health aspects will also appeal to the biomedical research community.
English
Dr Peter Eastwood has worked as a development engineer at the Ford Motor Company, Dunton, UK, since 1998. He completed a PhD in chemical sensors at University College in Swansea in 1992, and then worked as a research engineer for Ford and subsequently Bosch in the USA before taking up his current position. He has published 1 previous title with RSP, Critical Topics in Exhaust Gas Aftertreatment.
English
Acronyms and Abbreviations.
Chapter 1. Introduction.
Chapter 2. Fundamentals.
2.1 Introduction.
2.2 Properties of Aerosol Particles.
2.2.1 Diameter and Shape.
2.2.2 Size Distribution.
2.2.3 Transport and Deposition.
2.2.4 Transformation and Mutation.
2.3 Particles in the Atmosphere.
2.3.1 Character and Behaviour.
2.3.2 Aerosols in Nature.
2.3.3 Anthropogenic Aerosols.
2.3.4 Environmental Implications.
2.4 Motor Vehicle Particulate.
2.4.1 Some Typical Particles Dissected.
2.4.2 What happens within the Engine.
2.4.3 What Happens within the Exhaust.
2.4.4 Number versus Mass.
2.5 Closure.
Chapter 3. Formation I: Composition.
3.1 Introduction.
3.2 Carbonaceous Fraction: I.
Classical Models.
3.2.1 Empiricisms.
3.2.2 Inception.
3.2.3 Surface Growth.
3.2.4 Agglomeration.
3.2.5 Oxidation.
3.3 Carbonaceous Fraction: II.
The Combusting Plume.
3.3.1 Historical Overview.
3.3.2 Premixed Burn.
3.3.3 Mixing-Controlled Burn.
3.3.4 Late Burn.
3.4 Carbonaceous Fraction: III.
Wall Interactions.
3.4.1 Theoretical.
3.4.2 Experimental.
3.5 Ash Fraction.
3.5.1 Chemical Reactions.
3.5.2 Gas-to-Particle Conversion.
3.6 Organic Fraction.
3.6.1 Preparatory Chemical Reactions.
3.6.2 Chemical Reactions in the Exhaust.
3.6.3 Gas-Particle Conversion: Models.
3.6.4 Gas-Particle Conversion: Measurements .
3.6.5 White Smoke.
3.7 Sulphate Fraction.
3.7.1 Chemical Reactions.
3.7.2 Gas-to-Particle Conversion.
3.8 Closure.
Chapter 4. Formation II: Location.
4.1 Introduction.
4.2 Within the Exhaust System.
4.2.1 Storage and Release.
4.2.2 Deposition within Catalysts.
4.3 Within the Exhaust Plume.
4.4 Within the Transfer Line.
4.5 Within the Dilution Tunnel.
4.6 On the Filter.
4.7 Closure.
Chapter 5. Measurement.
5.1 Introduction.
5.2 Particulate Measured Conventionally.
5.2.1 Drawing a Sample of Exhaust.
5.2.2 Diluting the Exhaust.
5.2.3 Collection onto a Filter.
5.2.4 Fractionation by Gasification.
5.2.5 Fractionation by Dissolution.
5.3.6 Chemically Assaying the Organic Fraction .
5.3.7 Biologically Assaying the Organic Fraction .
5.3 Particulate Measured Individually.
5.3.1 Inertial Mobility.
5.3.2 Electrical Mobility.
5.3.3 Laser-Induced Incandescence.
5.3.4 Light Scattering.
5.4 Particulate Measured Collectively.
5.4.1 Photoacousticity.
5.4.2 Photoelectricity and Diffusion Charging.
5.4.3 Electrical Charge.
5.4.4 Flame Ionisation.
5.4.5 Mass.
5.4.6 Smoke.
5.5 Closure.
Chapter 6. Characterisation.
6.1 Introduction.
6.2 Physical Characterisation.
6.2.1 Microstructure.
6.2.2 Morphology.
6.2.3 Density.
6.2.4 Surface Area.
6.2.5 Electrical Charge.
6.3 Chemical Characterisation.
6.3.1 Carbonaceous Fraction.
6.3.2 Ash Fraction.
6.3.3 Organic Fraction.
6.3.4 Sulphate Fraction.
6.4 Biological Characterisation.
6.5 Demographical Characterisation.
6.6 Closure.
Chapter 7. Abatement.
7.1 Introduction.
7.2 Fuel Formulation.
7.2.1 Sulphur.
7.2.2 Hydrocarbons.
7.2.3 Oxygenates.
7.2.4 Additives.
7.2.5 Volatility, Cetane Number and Density.
7.3 Fuel Injection.
7.3.1 The Injector Nozzle.
7.3.2 Injection Pressure.
7.3.3 Injection Scheduling.
7.4 Exhaust Gas Recirculation.
7.5 Induction.
7.5.1 External to the Engine.
7.5.2 Internal to the Engine.
7.6 Lubrication.
7.6.1 Oil in Particulate.
7.6.2 Particulate in Oil.
7.7 Alternative Combustion.
7.8 Aftertreatment.
7.8.1 Catalytic Converters.
7.8.2 Particulate Filters.
7.9 Closure.
Chapter 8. Gasoline Engines.
8.1 Introduction.
8.2 A Historical Perspective.
8.2.1 Organometallic Fuel Additives and Ash .
8.2.2 Oxidation Catalysts and Sulphates.
8.3 Port-Injection Engines.
8.3.1 Formation.
8.3.2 Characterisation.
8.3.3 Abatement.
8.4 Direct Injection Engines.
8.4.1 Formation.
8.4.2 Characterisation.
8.4.3 Abatement.
8.4 Two-Stroke Engines.
8.5 Closure.
Chapter 9. Disintegration.
9.1 Introduction.
9.2 Roads.
9.3 Brakes.
9.4 Tyres.
9.5 Exhausts.
9.6 Catalysts.
9.7 Closure.
Chapter 10. Toxicology.
10.1 Introduction.
10.2 Public Exposure.
10.3 Public Health.
10.4 Pathogenesis.
10.5 Epidemiology.
10.6 In Vitro.
10.7 In Vivo.
10.8 Humans.
10.9 Closure.
10.10 Glossary.
Chapter 11. Closure.
11.1 Recommendations for Research.
11.2 Smaller Particles in Larger Numbers; or Larger Particles in Smaller Numbers.
11.3 Smaller and Smaller and Smaller.
11.4 Broader Questions of Policy.
Bibliography.
Literature Cited.
Subject Index.
English
"This is the definitive text in the field today … Dr Eastwood has performed a valuable service" (Chemistry World, October 2008)
