Home

6 Common Problems In Vacuum Cleaners And How To Fix Them

The vacuum cleaner is one of the familiar household appliances. A vacuum cleaner will help you clean all the dirt on the floor, mattress, pillow, sofa, etc. However, in using a vacuum cleaner in general and  Shark NV360 vacuum in particular, for many different reasons that the vacuum cleaner will encounter some problems and lead to damage. In today's article, we will learn together some common failures and fix them quickly and effectively.

Vacuum cleaner not working

Maybe after a period of use, suddenly one day you find your vacuum cleaner is not working.

Here are some reasons you can consider:

• The plug is loose, or the power cord is broken. Therefore, you need to check the pin and the power cord of the machine.
• The vacuum cleaner has been powered on but still cannot be used; the cause maybe because there are sharp objects in the machine, a metal that damages the engine and even fires the machine.

To fix this situation, you should unplug and check, then remove the stuck objects in the machine. Next is to wait about 30-45 minutes, then restart the device and continue using.

The vacuum cleaner has a weak suction power

If one day you notice that your Shark navigator NV360  is weak, and the suction power is inferior.

The cause may be that you have not regularly cleaned the machine head and dust filter. This causes dirt to stick to the machine head, reducing the ability to vacuum.

The fix for this situation is to clean the filter and the machine head regularly every time it is used. If you cannot clean the machine head, contact the store where you purchased the product for assistance with the best cleaning method.

The engine is working but not vacuuming

This phenomenon's leading cause may be an obstruction in the engine airflow, a problem in the intake pipe, or the dust cup. In addition, your machine may also have issues related to rotating shafts, worn brushes.

• If you want to fix this situation, conduct a thorough cleaning and pick up all the garbage in the straws and nozzles.
• In case your dust bag is full or torn, replace it with a new one.
• When the cause is a shaft or bearing problem, you can check the amount of oil and lubricant in the device.

The vacuum cleaner makes a loud noise

The cause of this phenomenon might be damaged ammunition or the manifold in the machine has been corroded.

To fix it, you should replace the new bullet tarpaulin or the machine's manifold. However, only professionals can solve the problem of replacing this part.

The vacuum cleaner often cuts off while in use.

If the vacuum cleaner is in use, it may be because the power cord is broken or the direct connection to the power source is lost.

In addition, the broom or vacuum cleaner head has been coughed up and is out of work for a certain period.

In this situation, you need to check the actual connection of the wires to the power source, check the brush or nozzle. In addition, if you find that the power cord is open, broken or the meeting is too worn or replaced.

The vacuum cleaner is hot

Too much dirt on the machine head causes friction force when operating, making the device more prone to heat.

In addition, the cause may also be due to the continuous use of the vacuum cleaner, exceeding the time allowed by the manufacturer..

The fix is quite simple, and you just need to clean the overall machine and limit the use of the vacuum cleaner continuously for a few hours.

Thus, today's article has sent you 6 common problems in the process of using shark model nv360. Hopefully, the above Shark navigator lift-away deluxe NV360 will help you use the machine safely and longer!